The CT160F split-core current sensors transformer are designed for fast and easy installation without the need to disconnect any loads.
These high precsion units are equally suitable for Current or Power measurement. They are fully compatible with the Energy Meter.
An internal protection device across the secondary winding of the CT limits the output to a low safety voltage - no more worries about open-circuiting CT secondary circuits.
Miniature Size
Low Cost
Safe, easy and simple to install
BRIEF ELECTRICAL SPECIFICATION -CT160F @25C degree
Nominal input current: 100Amp
Maximum input current: 300Amp(4kA 1minute)
Output at: 0.3333Vac or 33.33mA
Frequency range:50-60Hz
Accuracy:(0.1-1.3)¡À1%
Phase Error:1.5¡ã¡À1¡ã
Temperature coefficient:60ppm/¡æ
MECHANICAL
Enclosure: plastic to UL94V-0
Insulation voltage:300Vrms CAT III
Environment:indoor use only
Altitude<2000m
Operating temperature: -25¡æ to +70¡æ
Storage temperature: -30¡æ to +90¡æ
Humidity:80% RH Max at30¡æ
Non-condensing
Output connection: 1m longe captive cable
